HUSKEY™ SPECIALTY LUBRICANTSValve Lubricants and Sealants
Temperature Range: 30°F to 700°F HUSKEY NO. 2 H.D. - is highly versatile valve sealant and lubricant that contains a balanced blend of fine to coarse PTFE particles suspended in a special synthetic lubricating carrier. HUSKEY No. 2 HD is designed for use on ball or plug valves that are leaking fuel to wear or scoring. It is resistant to a large variety of line products such as water, crude or heating oils, fuels, dilute acids and caustics, steam, petroleum solvents, butane, propane, L.P.G., etc. Temperature Range: 40°F to 500°F HUSKEY NO. 3 - With Fluorocarbon Resin - An excellent plug valve lubricant/sealant for general hydrocarbon and LPG service. Good for crude oil and compressor station valves, excellent as lubricant/sealant in X-mas tree valves. Excellent for applications in wastewater and sewage treatment facilities. HUSKEY NO. 4 - is a pure synthetic, non-melting, acid resistant lubricant/sealant containing micro fine PTFE particles HUSKEY NO. 4 was designed for all lubricated valves operating in corrosive environments of sulfuric acid, caustic soda, brine, fatty acids, ammonia, and other severe service conditions. Temperature Range: 20°F to 500°F HUSKEY NO. 6 - For WKM, OCT Lanzagorta, Gray, Seaboard, Barton, Vetco, and other valves with body cavities and seat lubrication on gate valves. Can be used on both line valves or pipeline production and X-mas trees, both gas and crude service. Temperature Range: 20F to 400F HUSKEY NO. 7 - was developed for use in difficult-to-hold products such as: gasoline, aviation fuels, mineral spirits, and other fuel blends. Will not contaminate line products. Temperature Range: 10°F to 425°F HUSKEY PF-30 LUBE is a perflouropolyether (PFPE) base oil, with state-of-the-art additives, which is thickened with PTFE to form a grease. It can be used in a myriad of applications. Whenever one finds limitations with their present grease, HUSKEY PF-30 meets challenging requirements. For example, HUSKEY PF-30 does not attack seals under high temperature; it is not attacked by fuming sulfuric acid, or high pH caustic sodium hydroxide; it has no flash point; therefore, it is safe to use under any conditions. It is safe to use in oxygen service; it can be used continually at 550°F, so it finds a multitude of uses at high temperatures, it has a low pour point for excellent low temperature performance. It has very low volatility at high temperatures, so it can be used in heavily loaded bearings. Operating temperature - 40°F to + 550°F HUSKEY VALVE PURGE - is a specially formulated product designed to clean and free stick or chronic hard-to-operated valves. HUSKEY VALVE PURGE contains Molybdenum disulfide, graphite, solvents and detergents that can be used in most plug, gate, or ball valve. It works as an anti-seize, penetrate and lubricant, to dissolve harmful and unwanted residue buildups. Once the valve is operating freely replace Valve Purge with a HUSKEY Lubricant/Sealant designed for your service. Temperature Range: 30°F to 600°F (base grease) PACKAGE AVAILABILITY |