ASTM F36
Compressibility, %
at 34.5 MPa
(5000 psi)
Minimum
Recovery, %
ASTM F152
Minimum Tensile Strength
MPa (psi), AMD
Composition
Classification
ASTM F104
Call-Out
Fiber
Binder Type
CMP-4000
A high performance, compressed material with excellent sealability and torque retention properties.
Short duration maximum temperatures up to 350°C (650°F). Common applications include: OEM and Industrial steam, water, oil and chemical sealing.
1.55 (97)*
5 - 15
50
< 0.8mm Gauge: 13.60 (1968)
All other Gauges: 18.60 (2700)
Synthetic
Blend
Fully Cured¹
Nitrile Butadiene
Rubber
Value Grade
Sheet
F722930E22M9
CMP-4200
A solvent-free, high performance compressed material with exceptional sealability, torque retention and crush and blowout resistance. Suitable for steam, water, oil and chemical applications.
Short duration maximum temperatures up to 350°C (650°F). Common applications include: OEM and Industrial steam, water, oil and chemical sealing.
A high density material used in heavy-duty oil sealing applications. The specification values are for 0.8mm (0.031") gauge material.
Short duration maximum temperatures up to 290°C (550°F). Common applications include: heavy-duty oil sealing such as diesel engine oil pan and front cover.
A high density material with superior mechanical strength in heavy- duty applications. It has exceptional tensile strength and crush, blowout and erosion resistance. It is also resistant to shear and friction damage in dynamic joints.
Short duration maximum temperatures up to 350°C (650°F). Common applications include: heavy-duty applications sealing transmission fluid, axle lube, oil, fuel, coolant, water and steam.
1.50 (93.6)
7 - 17
40
< 0.5mm Gauge: 12.40 (1800)
0.5 to 0.8mm Gauge: 24.10 (3500)
All other Gauges: 27.50 (3985)
Aramid
Fully Cured¹
Nitrile Butadiene
Rubber
Value Grade
Sheet
F729900E39M9
MP-15
A material with excellent low flange pressure sealability and bolt torque retention designed for heavy-duty applications.
Short duration maximum temperatures up to 205°C (400°F). Common applications include: heavy-duty applications including compressors and diesel engines.
1.54 (96)
13 - 25
50
10.34 (1500)
Synthetic
Blend
Polychloroprene
Value Grade
Roll
F729000M5
MP-2N
A material specifically engineered to conform well to irregular flange surfaces, with exceptional sealability for coolant, lubrication and induction systems.
Short duration maximum temperatures up to 205°C (400°F). Common applications include: automotive powertrain, marine and small engine applications to seal coolant, lubrication and induction systems.
1.35 (84)
13 - 25
35
8.28 (1200)
Synthetic
Blend
Nitrile Butadiene
Value Grade
Roll
F729000M9
N-8092
A material with excellent crush resistance at high flange pressures and superior sealing properties with oil, fuel and water.
Short duration maximum temperatures up to 180°C (350°F). Common applications include: automotive, small engine and compressor applications.
1.20 (75)
15 - 30
35
11.03 (1600)
Reinforced
Cellulose
Nitrile Butadiene
Value Grade
Roll
F729900E59M9
PF-4N
A material with maximum fluid resistance and excellent sealability in a variety of environments and flange conditions.
Short duration maximum temperatures up to 290°C (550°F). Common applications include: front cover, rear seal, water pump and intake manifold.
1.44 (90)
12 - 20
45
8.97 (1300)
Synthetic
Blend
Fully Cured¹
Nitrile Butadiene
Value Grade
Roll
F729000M9
PF-4S
A material designed for various oil, air and coolant applications. It is a replacement for styrene butadiene rubber bound calendered sheet materials and offers improved oil sealability over nitrile butadiene bound materials.
Short duration maximum temperatures up to 290°C (550°F). Common applications include: oil pan, front cover, intake manifold and rear seal.
1.44 (90)
9 - 23
45
8.62 (1250)
Synthetic
Blend
Fully Cured¹ Styrene
Butadiene
Value Grade
Roll
F729000M9
VB-72
A high performance material with excellent erosion resistance, designed specifically for valve body and other heavy-duty applications with exposure to high fluid pressures and flow rates.
Short duration maximum temperatures up to 290°C (550°F). Common applications include: heavy-duty applications with exposure to high fluid pressures and flow rates.
1.47 (92)
5 - 20
40
15.86 (2300)
Synthetic
Blend
Fully Cured¹
Nitrile Butadiene
Value Grade
Roll
F729900M9
Betafl ex-69
A material with excellent tensile strength, crush and erosion resistance
against high volume fl uid fl ow and impingement.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: automatic transmission valve body, pump, and
accumulator/channel plate as well as general aftermarket sealing
applications.
1.0 (60)
5 - 15
54
27.59 (4000)
Cellulose
Nitrile Butadiene
Roll
CN-705
A low density and highly conformable material suitable for use with oil,
gasoline and water. Material contains cork particles as a filler.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: light-duty, general oil, gas, water and air sealing.
0.61 (38)
0.61 (38)
25
5.52 (800)
Cellulose
Nitrile Butadiene
Roll
F339199E99M9
CS-301
A low density and highly conformable material suitable for use with oil
and water. Material contains cork particles as a filler.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: light-duty, general oil, water and air sealing.
0.61 (38)
25 - 40
30
4.83 (700)
Cellulose
Controlled Swell³
Styrene Butadiene
Roll
F339996E99M9
D-7200
A high density material with resistance to oil, fuel, water and coolant.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: oil, fuel, water and coolant sealing.
1.50 (93.8)*
8 - 18
40
13.79 (2000)
Cellulose
Fully Cured¹
Nitrile Butadiene
Sheet
F729900E32M6
D-7201
A high density material with excellent mechanical strength, sealability
and erosion resistance to high pressure, high volume fl uid fl ow and
impingement.
Short duration maximum temperatures up to 290°C (550°F). Common
applications include: heavy-duty automatic transmissions and various
military gaskets.
1.50 (93.8)
5 - 20
40
15.86 (2300)
Aramid
Fully Cured¹
Nitrile Butadiene
Sheet
F729900B4E33M9
D-7280
A compressible material with added resistance to fuel, oil, coolant and
water.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: low to moderate load fuel, oil, coolant and water
sealing.
1.20 (75)
15 - 30
40
10.34 (1500)
Cellulose
Fully Cured¹
Nitrile Butadiene
Sheet
F729190B9E93M5
D-7590
A highly compressible, chemically resistant, and elevated temperature
material used as a fi ller in composite gasket constructions.
Maximum continuous operating temperatures up to 260°C (500°F).
Common applications include: PTFE envelope and metal-jacketed
gaskets.
0.565 - 0.665
(35.3 - 41.5)
30 - 50
15
2.76 (400)
Aramid
Acrylic
Sheet
F729190B9E93M5
EMC-7201*
A composite structure of high density gasket facings chemically and
mechanically fused to an expanded steel core. Available in 0.042", 0.048"
and 0.060" gauges in a sheet size of 21" x 63" and 27" x 63" (usable area).
Short duration maximum temperatures up to 290°C (550°F). Common
applications include: diesel engine structural joints, high pressure
hydraulic joints and performance and racing engine applications.
2.0 (125)
14
50
37.90 (5500)
MD: 15.20 (2200)
Aramid
Fully Cured¹
Nitrile Butadiene
EnCore®
Sheet
HTX-900*
A composite material consisting of graphite-coated, high-temperature
facing material chemically and mechanically fused to an expanded steel
core. Available in 0.043", 0.048", 0.060" and 0.093" gauges in a sheet size
of 20" x 63" (usable area).
Designed for exhaust and heat shielding applications
at typical internal combustion engine temperatures. Common
applications include: exhaust manifold, header, collector and EGR
system and other industrial sealing applications that require high
strength, thermal integrity and anti-stick performance.
2.0 (125)
12
50
27.50 (4000)
MD: 15.20 (2200)
Hi-Temp
Blend
Fully Cured¹
Nitrile Butadiene
EnCore®
Sheet
M-5201
A high density material with added resistance to oil and fuel.
Short duration maximum temperatures up to 290°C (550°F). Common
applications include: heavy-duty diesel engine.
1.55 (97)*
7 - 17
40
< 0.8mm Gauge: 13.80
(2000)
All Other Gauges: 16.60
(2405)
Aramid
Fully Cured¹
Nitrile Butadiene
Sheet
F729900B4E43M9
Interface
Product
Characteristics
Uses
Density
g/cc
(lb./cu. ft.) (min.)
ASTM F36
Compressibility, %
at 34.5 MPa
(5000 psi)
Minimum
Recovery, %
ASTM F152
Minimum Tensile Strength
MPa (psi), AMD
Composition
Classification
ASTM F104
Call-Out
Fiber
Binder Type
MBF-G*
A high-temperature material combining an inorganic fi ber, low binder
facing material with an 0.2mm (0.008") tang perforated tin-plated steel
core. Available in several gauges, with roll widths up to 305mm (12")
wide. The typical values were established using an overall construction
thickness of 1.6mm (0.063").
Designed for exhaust and heat shielding applications at typical internal
combustion engine temperatures. Common applications include:
automotive and small engine header, downpipe and collector, EGR,
muffl er and other exhaust gas applications.
0.88 (55)
(facings only)
25 - 35
20 -30
29 (4250)
Hi-Temp
Blend
Nitrile Butadiene
EnCore®
Roll
MBG-C*
A high performance material combining graphite facings on a 0.2mm
(0.008") tang perforated tin-plated steel core. It is compressible and
resilient, yet offers excellent bolt torque retention and chemical and
heat resistance. The typical values were established using an overall
thickness of 1.2mm (0.047").
Designed for use to 500°C in cylinder head, EGR, and exhaust systems.
1.00 (62.4)
(facings only)
30 - 37
16 - 22
41.4 (6000)
Graphite
EnCore®
Roll
MBG-D*
A high performance material combining expanded graphite facings on
0.2mm (0.008") tang perforated tin-plated steel core. It is compressible
and resilient, yet offers excellent bolt torque retention and chemical
resistance and heat resistance. The typical values were established
using an overall thickness of 1.2mm (0.047").
Designed for use to 500°C in cylinder head, EGR, and exhaust systems.
1.12 (70)
(facings only)
23 - 30
20 - 28
34.5 (5000)
Graphite
EnCore®
Roll
MBG-H*
A high performance material combining expanded graphite facings on
0.2mm (0.008") tang perforated tin-plated steel core. It is compressible
and resilient, yet offers excellent bolt torque retention and chemical
resistance and heat resistance. The typical values were established
using an overall thickness of 1.2mm (0.047").
Designed for use to 500°C in cylinder head, EGR, and exhaust systems.
1.44 (90)
(facings only)
21 - 27
24 - 30
37.9 (5500)
Graphite
EnCore®
Roll
MCC*
A high performance, thermally stable material with 0.2mm (0.008”)
perforated tin-plated steel facings on one or both sides. The typical
values were established using only the fi ber core without cladding, with
a thickness of 1.6mm (0.062”). Double-clad material is available in 1.2mm
(0.047”) and 1.6mm (0.062”) thicknesses and single clad material is
available in 1.0mm (0.039”) and 1.2mm (0.047”) thicknesses.
Designed for exhaust and heat shielding applications at typical internal
combustion engine temperatures.
0.96 (60)
(core only)
At 6.9 MPa:
30
49
6.5 (943)
Hi-Temp
Blend
Nitrile Butadiene
EnCore®
Sheet
N-2085G
A material offering excellent resistance to water, coolant, oil and fuel.
Available in close tolerance gauges.
Short duration maximum temperatures up to 190°C (375°F). Common
applications include: hermetic compressor valve plate.
1.36 (85)
10 - 20
50
13.79 (2000)
Reinforced
Cellulose
Fully Cured¹
Nitrile Butadiene
Roll
F723940E43M6
N-8051
An oil resistant, light-duty material.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: low internal pressure and low fl ange pressure
applications up to 13.8 MPa (2000 psi).
1.30 (81)
10 - 25
40
2.76 (400)
Cellulose
Nitrile Butadiene
Roll
F339000M9, Z1
N-8090
A reinforced cellulose fi ber material with excellent oil resistance and
good sealing characteristics.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: water pump, transmission housing and fuel
systems.
1.28 (80)
15 - 25
35
13.79 (2000)
Reinforced
Cellulose
Latent Cure²
Nitrile Butadiene
Roll
F724900E49M6
N-8092CT
A material used primarily in applications that require close tolerance
gauge control for shimming.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: hermetic compressor valve plate.
1.20 (75)
15 - 30
35
11.03 (1600)
Reinforced
Cellulose
Nitrile Butadiene
Roll
F729900E59M9
N-8094
A low density material that conforms well to irregular fl ange surfaces
and has very good crush resistance at high fl ange pressures.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: oil, fuel and water fl anges where moderate
conformability is needed.
0.87 (54)
28 - 42
20
> 1.2mm Gauge: 6.90 (1000)
All Other Gauges: 8.62 (1250)
Reinforced
Cellulose
Nitrile Butadiene
Roll
F729900E99M9
NI-2085
A material resistant to oil, fuel, water and coolant with excellent strength
and sealability characteristics.
Short duration maximum temperatures up to 190°C (375°F). Common
applications include: oil, fuel, water and coolant applications.
1.36 (85)
10 - 20
50
13.79 (2000)
Reinforced
Cellulose
Nitrile Butadiene
Roll
F723940E43M6
NI-2086
A material resistant to oil, fuel, water and coolant with excellent strength
and sealability characteristics.
Short duration maximum temperatures up to 190°C (375°F). Common
applications include: oil, fuel, water and coolant applications.
1.36 (85)
10 - 20
50
13.79 (2000)
Reinforced
Cellulose
Fully Cured¹
Nitrile Butadiene
Roll
F723940E43M6
NI-2095A
A standard cylinder head facing material designed to deliver the
performance required for worldwide cylinder head applications. It is
easily combined on perforated and solid metal core. (Minimum order
requirements may apply).
Designed for cylinder head and intake facing for water-cooled engines.
1.15 (72)
15 - 30
25
4.14 (600)
Hi-Temp
Blend
Nitrile Butadiene
Roll
F729150E92M9
NI-2098
A heavy-duty cylinder head facing material used with both solid and
perforated metal cores. It is compatible with most polymers used in
bead printing processes.
Designed for use in high-performance engine cylinder head and intake
manifolds.
1.19 (74)
15 - 30
20
1.72 (250)
Aramid
Nitrile Butadiene
Roll
F729990E52M2
NI-2900
An economical facing material designed to deliver the performance
required for worldwide cylinder head and manifold applications. It is
easily combined on perforated and solid metal core. (Minimum order
requirements may apply).
Designed for cylinder head and intake facing for water-cooled engines.
1.04 (65)
27 - 37
18
3.79 (550)
Hi-Temp
Blend
Nitrile Butadiene
Roll
F729150E52M9
NI-4002
A facing material with low ignition loss and good torque retention
properties that, when combined on perforated metal core, is intended
for elevated temperature applications.
Common applications include: high temperature applications such as
exhaust systems.
0.88 (55)
15 - 30
25
2.07 (300)
Hi-Temp
Blend
Nitrile Butadiene
Roll
F339997E92M9
NV-512
An increased strength and fluid resistant material with very high tensile
strength and crush resistance.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: air pump, carburetor, gear box and transmission.
0.96 (60)
10 - 20
60
20.69 (3000)
Cellulose
Fully Cured¹
Nitrile Butadiene
Roll
F333949E43M7
NV-519
A material with excellent tensile strength, crush and erosion resistance
against high volume fluid flow and impingement.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: automatic transmission valve body, pump, and
accumulator/channel plate as well as carburetor and air compressor.
0.96 (60)
5 - 15
60
27.59 (4000)
Cellulose
Nitrile Butadiene
Roll
F332949E42M8
NV-565
A low density gasket material with good oil, fuel and water resistance
that conforms well to irregular flange surfaces.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: carburetor, fuel system and water pump.
0.64 (40)
15 - 30
40
40
Cellulose
Nitrile Butadiene/
Styrene Butadiene
Roll/Sheet
F339997E93M9
PF - 5N
A high density material with added fuel and oil resistance. It is a
recommended replacement for calendered or joint sheet materials.
Short duration maximum temperatures up to 230°C (440°F). Common
applications include: front cover, rear seal, water pump and intake
manifold.
1.44 (90)
5 - 20
55
14.48 (2100)
Synthetic
Blend
Nitrile Butadiene
Roll
F729100E93M9
PF - 6S
A material designed for use in oil, coolant and air sealing applications.
Short duration maximum temperatures up to 230°C (440°F). Common
applications include: oil pan, front cover, rear seal, water pump and
intake manifold.
1.44 (90)
10 - 20
45
8.28 (1200)
Synthetic
Blend
Controlled Swell³
Styrene Butadiene
Roll
F723960M9
RN-8011
A low density material providing excellent sealing properties for oil and
water at low flange pressures.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: engine and transmission pan, water pump and
environmental sealing.
0.61 (38)
35 - 60
15
1.52 (220)
Cellulose
Nitrile Butadiene
Roll
F339099E09M9
Interface
Product
Characteristics
Uses
Density
g/cc
(lb./cu. ft.) (min.)
ASTM F36
Compressibility, %
at 34.5 MPa
(5000 psi)
Minimum
Recovery, %
ASTM F152
Minimum Tensile Strength
MPa (psi), AMD
Composition
Classification
ASTM F104
Call-Out
Fiber
Binder Type
S-207
A material used in many aftermarket oil and coolant applications.
Short duration maximum temperatures up to 180°C
(350°F). Common applications include: oil and coolant aftermarket
sealing.
0.88 (55)
10 - 30
30
9.66 (1400)
Cellulose
Controlled Swell³
Styrene Butadiene
Roll
F339999E99M9
S-8091
A material used in many OEM and aftermarket oil and coolant
applications.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: oil, fuel and low pressure steam sealing for low to
moderate loads.
1.20 (75)
15 - 25
25
12.41 (1800)
Reinforced
Cellulose
Controlled Swell³
Latent Cure² Styrene
Butadiene
Roll
F724900E09M9
SV-360
A low density, general purpose material.
Short duration maximum temperatures up to 180°C (350°F). Common applications include: anti-squeak, dust seal, heater, oil seal, shim stock and water pump.
0.67 (42)
15 - 30
40
10.34 (1500)
Cellulose
Styrene Butadiene
Roll
F339197E93M5
TN-9000
A material with good tensile strength, low creep relaxation and excellent
fuel and oil resistance.
Short duration maximum temperatures up to 400°C (750°F). Common
applications include: applications with high fl ange pressures and
temperatures.
1.44 (90)
7 - 17
50
17.24 (2500)
Aramid
Fully Cured¹
Nitrile Butadiene
Roll
F729900E33M9
TN-9001
A heavy-duty material with excellent oil resistance.
Short duration maximum temperatures up to 400°C (750°F). Common
applications include: small engine muffl er gaskets and general heavyduty
diesel engine oil sealing.
1.28 (80)
15 - 30
40
13.79 (2000)
Aramid
Latent Cure²
Nitrile Butadiene
Roll
F729900E49M6
TN-9004 A heavy-duty, high density material with good tensile strength and
excellent resistance to fuel and oil.
Short duration maximum temperatures up to 350°C (650°F). Common
applications include: general heavy-duty engine and transmission oil
sealing.
1.52 (95) 5 - 20 45 17.24 (2500) Aramid Fully Cured¹
Nitrile Butadiene Roll F729100E33M9
TN-9005 A heavy-duty material that conforms well to irregular fl ange surfaces. Short duration maximum temperatures up to 350°C (650°F). Common
applications include: fuel/air delivery, transmission, and coolant systems. 1.28 (80) 15 - 30 25 10.34 (1500) Aramid Latent Cure²
Nitrile Butadiene Roll F729900E59M5
TN-9014 A material with excellent fuel and oil resistance.
Short duration maximum temperatures up to 290°C (550°F). Common
applications include: water pumps and general automotive, light diesel
and small engine oil sealing.
1.44 (90) 7 - 20 45 17.24 (2500) Aramid /
Cellulose
Fully Cured¹
Nitrile Butadiene Roll F729900E99M9
TN-9015
A material that conforms well to irregular fl ange surfaces and has
excellent resistance to fuel and oil.
Short duration maximum temperatures up to 290°C (550°F). Common
applications include: fuel/air delivery, transmission, natural gas and
coolant systems.
1.28 (80) 12 - 27 30 10.34 (1500) Aramid /
Cellulose
Latent Cure²
Nitrile Butadiene Roll F729900E99M5
TN-9040
A high density material with high mechanical integrity.
It has excellent crush resistance, good creep relaxation properties and
high tensile strength.
Short duration maximum temperatures up to 290°C (550°F). Common
applications include: heavy-duty fl anges with high load and or high shear
forces, and high internal pressure ATF gaskets.
1.49 (93) 7 - 17 40 27.59 (4000) Aramid Fully Cured¹
Nitrile Butadiene Roll F729900E43M8
TN-9045 A heavy-duty material for use in elevated temperature applications.
Designed for exhaust sealing at typical internal combustion engine
temperatures. Common applications include: exhaust header and
collector gaskets.
1.28 (80) 10 - 25 45 10.34 (1500) Acrylic Blend Acrylic Roll F729900E93M5
TS-9003
A material with good oil sealing characteristics at low fl ange pressure
that conforms well to irregular fl ange surfaces. It is an alternative to highswell
compressed sheet materials.
Short duration maximum temperatures up to 350°C
(650°F). Common applications include: oil pans
and stamped cover gaskets.
1.44 (90) 15 - 30 20 6.90 (1000) Aramid
Controlled Swell³
Latent Cure² Styrene
Butadiene
Roll F729900E09M4
TS-9006 A heavy-duty, high density material.
Short duration maximum temperatures up to 350°C
(650°F). Common applications include: oil, water
and steam applications with high fl ange pressures.
1.52 (95) 5 - 20 40 10.34 (1500) Aramid Fully Cured¹ Styrene
Butadiene Roll F729900E09M5
TS-9013 A material that conforms well to irregular fl ange surfaces. Short duration maximum temperatures up to 290°C (550°F). Common
applications include: water and oil sealing. 1.36 (85) 12 - 25 25 8.28 (1200) Aramid /
Cellulose Styrene Butadiene Roll F729900E09M9
TS-9016 A fully cured material for additional strength and degradation resistance. Short duration maximum temperatures up to 290°C (550°F). Common
applications include: water and oil sealing. 1.44 (90) 10 - 25 40 12.41 (1800) Aramid /
Cellulose
Fully Cured¹ Styrene
Butadiene Roll F729900E09M9
2331 An environmentally compatible, low density gasket material formulated
from recycled gasket materials.
Short duration maximum temperatures up to 180°C (350°F). Common
applications include: general, light-duty applications. 0.56 (35) 15 - 35 35 6.90 (1000) Cellulose Styrene Butadiene Roll F339177E73M4
2755
A material with excellent compressibility, strength and sealability suited
for air, coolant and oil applications. Traditional material color is gray.
Additional color options available for this material include: Green as 2750
and Red as 2752.
Short duration maximum temperatures up to 190°C (375°F). Common
applications include: general aftermarket sealing. 1.33 (83) 5-20 40 9.65 (1400) Reinforced
Cellulose
Styrene Butadiene/
Acrylic Blend Roll F729990E59M9
2850 A distinct green colored material resistant to oil, fuel, water and coolant
with excellent strength and sealability characteristics.
Short duration maximum temperatures up to 190°C (375°F). Common
applications include: general aftermarket sealing. 1.36 (85) 8-20 40 13.79 (2000) Reinforced
Cellulose Nitrile Butadiene Roll F729900E43M6
