3M™ Scotch-Weld™ Instant Adhesives are single component, high strength
cyanoacrylate adhesives.
Features
- One component, high strength adhesives that
cure at room temperature.
- Products provide varying cure times, bond
strengths, and viscosities.
- Can be used to bond a variety of substrates
including many rubbers, plastics, and metals.
- Economical to use as it requires only drops
of adhesive to provide strong bonds to many metals, plastics,
and rubbers.
3M™ Scotch-Weld™ Instant Adhesive CA4 is a high-strength, very fast setting,
multi-purpose cyanoacrylate adhesive that cures at room temperature
with very low bonding pressures. It has particularly good
adhesion to most cured rubbers.
3M™ Scotch-Weld™ Instant Adhesive CA5 is a high-strength, slow setting cyanoacrylate
adhesive that cures at room temperature. Its relatively high
viscosity is especially useful where some gap filling is desired
for bonding rough or uneven surfaces. The longer set rate
allows more time for proper alignment of parts to be bonded.
Meets CID A-A-3097, Type II, Class 3.
3M™ Scotch-Weld™ Instant Adhesive CA7 is a high-strength, extremely fast setting
cyanoacrylate adhesive that cures quickly at room temperature.
It has excellent adhesion to many metals, plastics and rubbers,
and produces bonds with more shock and impact resistance than
many typical cyanoacrylate adhesives.
3M™ Scotch-Weld™ Instant Adhesive CA8 is a high-strength, rapid-setting cyanoacrylate
adhesive that cures at room temperature. It has excellent
adhesion to many metals, plastics and rubbers, and produces
bonds with more shock resistance than many typical cyanoacrylate
adhesives. Meets CID A-A-3097, Type II, Class 2.
3M™ Scotch-Weld™ Instant Adhesive CA9 is a high-strength cyanoacrylate adhesive
that cures slower than many cyanoacrylates at room temperature.
The longer set rate allows more time for proper alignment
of parts before bonding takes place. It has excellent adhesion
to many metals, plastics and rubbers, and produces bonds with
more shock and impact resistance than many typical cyanoacrylate
adhesives. Meets CID A-A-3097, Type II, Class 3.
3M™Scotch-Weld™ Instant Adhesive CA40 is a high-strength, very fast-setting
cyanoacrylate adhesive that cures at room temperature with
very low bonding pressures. It has particularly good adhesion
to many difficult to bond substrates such as EPDM rubber,
aluminum and flexible vinyl.
3M™ Scotch-Weld™ Instant Adhesive CA40H is a high-strength cyanoacrylate adhesive.
It is a higher viscosity, slightly slower setting version
of Scotch-Weld CA40. It has particularly good adhesion to
many difficult to bond substrates, such as aluminum, EPDM
rubber, and flexible vinyl. Scotch-Weld CA40H exhibits good
resistance to soap solutions and isopropyl alcohol. Its high
viscosity helps prevent run off during application, and its
slower set time allows additional time for proper alignment
of parts.
3M™ Scotch-Weld™ Instant Adhesive Gel CA50 is a high-strength, surface insensitive,
gel cyanoacrylate adhesive. Its gel consistency allows it
to be used in many non-sag vertical applications, and to fill
gaps up to .020 inches. The very slow cure rate allows plenty
of time to reposition parts.
3M™ Scotch-Weld™ Instant Adhesive CA100 is a high-strength cyanoacrylate adhesive.
Its relatively high viscosity (approximately 3000 cps) allows
gap-filling capability up to .020 inches. It has high T-Peel
strength, thermal shock resistance, impact resistance, and
excellent metal bonding capabilities.
|
